AT Order Indoor Climate: How ÅBN solves your challenges with temperature and CO2

Has your company or institution received a AT indoor climate regulations from the Danish Working Environment Authority? You are not alone. Many workplaces experience problems with poor indoor climate, which can result in orders to AT mandate temperature or AT mandates CO2 . Fortunately, there are documented solutions that not only solve the problems, but also help you document the improvements to the Danish Working Environment Authority.

What is an AT indoor climate regulation?

The Danish Working Environment Authority issues orders when the indoor climate in a workplace does not meet applicable requirements. The most common reasons for AT orders indoor climate include:

• Temperature problems : The temperature should be kept at 20-22°C during sedentary work and should not exceed 25°C.
• Poor air quality : CO2 content should not exceed 0.1% (1000 ppm) under normal conditions
• Insufficient ventilation : Air exchange is not sufficient to ensure good air quality
• Draught and cold : Air velocity must not exceed 0.15 m/s at 21°C

When you receive an AT order temperature or AT order CO2, you must not only solve the problem - you must also be able to document that the conditions have been rectified.

How ÅBN helps with AT indoor climate regulations

ÅBN's SKYEN solution is specifically designed to improve the indoor climate in workplaces and educational institutions. Through a large test funded by Realdania, it has been documented how SKYEN can visually guide users to significantly improve the indoor climate.

Documented effect of ÅBN's solution

The Realdania test showed tangible improvements in the indoor climate when SKYEN was implemented. The visual feedback from the sensors helps users to:

• Regulate ventilation in time
• Open doors and windows when CO2 levels rise
• Optimizing the room temperature
• Create a culture of good indoor climate

Why choose OPEN for AT mandates CO2 and temperature?

1. Comprehensive measurement of six indoor climate parameters

SKYEN not only measures CO2 and temperature, but also:

• Humidity
• Air pressure
• Sound
• Light

This gives you a complete picture of the indoor climate and helps identify any potential problems.

2. Real-time visual feedback

The innovative light shade shows the state of the indoor climate using colors:

• Green : Good indoor climate
• Yellow : Acceptable indoor climate
• Red : Poor indoor climate - action required

3. Documentation for the Danish Working Environment Authority

One of the biggest challenges when implementing AT indoor climate regulations is documenting the improvements. ÅBN delivers:

• Detailed data extraction from all sensors
• Historical data showing improvements over time
• Professional reports to authorities
• Continuous monitoring after implementation

Experiences from municipalities with AT orders

ÅBN has successfully helped both Egedal Municipality and Sorø Municipality with AT injunction cases. These cases show how the right technology combined with user involvement can solve even complex indoor climate problems.

What made the difference?

• Fast implementation : SKYEN can be installed without extensive renovations
• User engagement : The visual feedback creates awareness about the indoor climate
• Measurable effect : Concrete data show improvements in all parameters
• Long-term solution : The system continues to monitor and guide after installation

The Danish Working Environment Authority's requirements for indoor climate

To ensure that your solution meets the requirements of the Danish Working Environment Authority, it is important to understand the specific limit values:

AT CO2 mandate: What are the limits?

• Normal limit : Maximum 0.1% (1000 ppm) CO2
• Critical limit : If CO2 exceeds 0.2% (2000 ppm) for more than short periods, air exchange is insufficient
• Action : In case of high CO2 levels, ventilation must be improved immediately.

AT mandate temperature: What do the rules say?

• Optimal temperature : 20-22°C for sedentary work
• Maximum temperature : Do not exceed 25°C
• Special conditions : Sun through glass windows, lamps and office machines can raise the temperature further

How to get started with ÅBN

If you have received an AT order indoor climate, AT order temperature or AT order CO2, ÅBN can help you with a complete solution:

1. Consultation and analysis

We start by analyzing your specific AT order and identifying the necessary improvements.

2. Tailor-made solution

Based on your needs, we design a SKYEN installation that targets the specific issues identified in the injunction.

3. Installation and setup

Our experienced technicians install the system with minimal disruption to daily operations.

4. Follow-up and documentation

We continuously deliver reports and data extracts that can be used to document improvements to the Danish Working Environment Authority.

Resolve your AT order with documented effect

AT indoor climate regulations must be taken seriously, but with the right solution they can also be an opportunity to create a significantly better working environment. ÅBN's SKYEN solution combines innovative sensor technology with user-friendly visualization to create lasting improvements in the indoor climate.

With documented effects from the Realdania test and successful implementations in Danish municipalities, ÅBN is the ideal partner to solve your AT mandate CO2, AT mandate temperature or other indoor climate problems.

Get help with your AT indoor climate order today - contact ÅBN for a no-obligation consultation on how we can help your company create a healthier and more productive working environment.